Contact Us   
Your Position: Home > News > Company News

specifications: 5 mm to 200 mm Nylon Sheet

2014/6/4      view:

specifications: 5 mm to 200 mm Nylon Sheets, Nylon Plates

Size: 1-200 - mm * 500/1000 mm * 1000/2000 mm

Nylon Sheets, Nylon Plates is one of the most important engineering plastic series.This product is widely used, covering almost every field, are five of the most widely used in engineering plastics.

Nylon (Nylon Sheets, Nylon Plates ), Polyamide, Chinese English name Polyamide (PA), is on the main chain molecules containing repeated amide groups, thermoplastic resin.Its name by the synthesis of monomer on the specific number of carbon atoms.Is America's largest chemical industry company ─ ─ dupont famous chemist carothers and his team.Nylon is one of the most important engineering plastic series.This product is widely used, covering almost every field, are five of the most widely used in engineering plastics.

Nylon Sheet, Nylon Plate main features:

Mechanical strength, stiffness, hardness, high toughness, good ageing resistance, good mechanical damping capacity, good sliding resistance, excellent wear resistance, good machining performance, when used for precision control, no creep phenomenon, anti-wear performance good, good dimensional stability.

Application fields of nylon sheet:

Nylon SheetNylon Plate Widely used in chemical machinery, anti-corrosion equipment gear making bad material and parts.Wear parts, transmission parts, home appliance parts, automotive parts, wire rod to prevent the machine parts, chemical machinery parts, chemical equipment, etc.

The performance of the nylon sheet

The physical properties of the nylon plate is very good, mechanical toughness and strength and similar metal;The anti-fatigue performance of nylon sheet and aluminum alloy, cast iron are the same.And good chemical stability of nylon plate: alcohol, weak base, copper, esters, hydrocarbons, grease, etc. To nylon board doesn't work.

Good abrasion resistance of Nylon SheetNylon Plate : the coefficient of friction generally 0.1 0.3, is the 1/3 of babbitt, 1/4 of bakelite, is a kind of very good self-lubrication material.At the same time, the nylon plate has very good cold heat resistance: it has the highest resistance to temperature limit is 100 ° C, the lowest for 60 ° C, in this case to maintain a certain mechanical strength to work normally.

Nylon plates mechanical properties is also very good, and have high tensile resistance, surface hardness, flexural strength and impact strength and high ductility.

Nylon sheets density is small, light in weight per unit volume) : its density between 1.05 to 1.15.

Use nylon pipe instead of copper tube can be very intuitive see liquid flows, bending can according to customer's need for freedom.

Typical Properties      Test Standard Unit Typical Value Typical Value Typical Value
(Conductive PA6) (Antistatic PA6) (Insulation PA6)
I. Physical Properties                           
Density  ISO 1183 g/cm3 1.1-1.13 1.13-1.15 1.13-1.15
Water absorption ISO 62 % 11 9 9
II.Mechanical Properties          
Tensile strength at yield ISO 527-2 MPa 73 80 80
Tensile strength at break ISO 527-2 MPa / / /
Elongation at break ISO 527-2 % >41 >50 >50
Modulus of elasticity after tensile test ISO 527-2 MPa / / /
Modulus of elasticity after flexural test ISO 178 MPa 2650 3000 3000
Hardness-Rockwell ISO 2039-2   160 160 160
Hardness-Shore D DIN 53505   75 75 75
Charpy impact strength at 23°C ISO 179 kJ/m2 4.6 5.5 5.5
Friction coefficient DIN 53375   0.32-0.39 0.38-0.45 0.38-0.45
III.Thermal Properties          
Heat deflection temperature-HDT/A ISO 75-2 °C 55-75 55-75 55-75
Max.service temperature-Short term   °C ≤180 ≤180 ≤180
Max.Service Temperature-Long term   °C / / /
Thermal conductivity at 23°C DIN 11359 W/(K*m) 0.28 0.28 0.28
Coefficient of linear thermal expansion ISO 11359 10-4*K-1 0.7-1.0 0.7-1.0 0.7-1.0
IV.Electrical Properties          
Dielectric constant at 1MHz IEC 60250 106HZ 3.5 3.5 3.5
Dielectric loss factor at 1 MHz IEC 60250 106HZ 0.023 0.023 0.023
Surface resistivity IEC 60093 Ohm(Ω ) ≥104 ≥108 ≥1012
Dielectric strength IEC 60243-1 kV/mm >52 >56 60
V.Miscellaneous Data          
Flammability UL 94   HB HB HB